Shaft Seals > End Covers

End Covers
   

Seal Design

DMR™ End Covers are designed applications where the shaft does not pass through the housing wall of the bore, the end covers provide protection for the bearings. The covers were developed to fit into housing bores for rotary shaft seals and they have the same tolerances as those for the O.D. of a seal. The inner housing is carbon steel and the outer seal is nitrile rubber.

Cover Profile

Applications

Typically application for end covers is gear boxes, industries include:
• automotive
• agricultural equipment
• exercise equipment
• trucks
• buses
• trailers

WWW http://www.daemar.com

Copyright © 1996-2011. All rights reserved.
Daemar® Inc. / DMR™ / Fiber-Lube™ / Quick-Turn™ are trademarks of
Daemar® Inc. All material on the site, including, without limitation,
text, logo, software, photos, video, graphics, music, and sound, are
protected by copyright laws, both as individual works and as a
collection. No reproduction authorized in any form electronic or
otherwise without specific written permission.

This site includes links to other internet sites solely as a convenience
to users. Daemar, Inc. does not endorse any such linked sites or the
information, material, products and services offered.