Rotor Clip Retaining Rings for End-Play Takeup

Daemar Inc. Supplying the pace of industry 1.800.387.7115

F O R O


Rings for End-Play Takeup Rotor Clip bowed retaining rings are designed to compensate for accumulated tolerances in assemblies. Once snapped into the groove, bowed rings exert a force or "preload" on the retained parts made to the low side of the tolerances "snugging" everything up. They also act like a spring and "give" when parts made to the high side of the tolerances extend too far into the groove.

BHO - Internal Bowed Housing Ring Compensating for accumulated tolerances is what a BHO retaining ring is designed to do in a housing/bore. Once snapped into the groove, bowed rings exert a force or "preload" on the retained parts for the range specified on the BHO size range chart. Size Range: .250 - 1.750 inches

BSH - External Bowed Shaft Ring Compensating for accumulated tolerances is what a BSH "bowed" retaining ring is designed to do on a shaft. Once snapped into the groove, bowed rings exert a force or "preload" on the retained parts for the range specified on the BSH size range chart. Size Range: .250 - 1.750 inches

VHO - Internal Beveled Housing Ring These rings look exactly like their HO counterpart, only they have a 15° angle on the outer edge. This combines with a complementary groove angle to eliminate end play by wedging itself between the groove and the retained part. Size Range: 1.000 - 10.0 inches

VSH - External Beveled Shaft Ring These rings look exactly like their SH counterpart, only they have a 15° angle on the inner edge. This combines with a complementary groove angle to eliminate end play by wedging itself between the groove and the retained part. Size Range: 1.000 - 10.0 inches

BE - External Bowed E Ring Compensating for accumulated tolerances is what a BE "Bowed" retaining ring is designed to do on a shaft. Once snapped into the groove, bowed rings exert a force or a "preload" on the retained parts for the range specified on the BE size range chart. Size Range: .110 - .984 inches

EL - External Bowed Locking Ring Another variation of a bowed E ring is the EL. In addition to the bowed design for eliminating "play" in an assembly, it also features two prongs, which extend from the inner circumference to the open end locking the ring firmly into place. Size Range: .092 - .375 inches

Rotor Clip Retaining Rings for End-Play Takeup Applications

Technical Resources

Retaining Ring Interchange

Standard Materials

Standard Finishes

Packaging Options

How the Part Numbers Work

Applications

Retaining Ring FAQ

Automated Assembly

Installation

DMR Design Sheet

Retaining Ring Glossary

dmr_iso9001_2000

Copyright © 1996-2009. All rights reserved.
Daemar® Inc. / DMR™ / Fiber-Lube™ / Quick-Turn™ son marcas registradas de
Daemar® Inc. Todos los materiales de este sitio sin ninguna limitación, incluyendo
textos, logo, software, fotografías, videos, gráficas, música, y sonidos,
están protegidos por las leyes de derechos de autor.
La reproducción total o parcial, electrónica o de cualquier otra índole,
está estrictamente prohibida a menos que sea específicamente por escrito autorizada por Daemar.

Este sitio incluye conexiones a otros sitios del internet. El seguir dichas conexiones es una opción del usuario. Daemar
de ninguna manera se hace responsable por la información, materiales, productos y servicios ofrecidos en dichos sitios.