Spirolox Light Duty Retaining Rings

Daemar Inc. Supplying the pace of industry 1.800.387.7115

F O R O


Light Duty For economy in light duty applications. These Spiral Retaining Rings are single turn for shaft or bore dimaters from 1/2” through 10”. A radius removal notch is on one end. The other end is square cut. Rings are axially assembled.
UR - Internal, Single Turn The UR Series is intended for light duty applications. Retaining Rings are single turn for shaft ore bore dimaters from 1/2” through 10”. A radius removal notch is on one end. The other end is square cut. Rings are axially assembled. Size Range: .500 - 10.0 inches

US - External, Single Turn The US Series is intended for light duty applications. Retaining Rings are single turn for shaft ore bore dimaters from 1/2” through 10”. A radius removal notch is on one end. The other end is square cut. Rings are axially assembled. Size Range: .500 - 10.0 inches

Light Duty Spirolox Retaining Ring Applications

Technical Resources

Spiral Ring Interchange

Materials & Finishes

Standard End Conditions

Special End Conditions

How the Part Numbers Work

Typical Applications

Installation

Dished-Type Rings & Self-Locking Rings

Ring Selection Guide

DMR Design Sheet

Retaining Ring Glossary

Copyright © 1996-2009. All rights reserved.
Daemar® Inc. / DMR™ / Fiber-Lube™ / Quick-Turn™ son marcas registradas de
Daemar® Inc. Todos los materiales de este sitio sin ninguna limitación, incluyendo
textos, logo, software, fotografías, videos, gráficas, música, y sonidos,
están protegidos por las leyes de derechos de autor.
La reproducción total o parcial, electrónica o de cualquier otra índole,
está estrictamente prohibida a menos que sea específicamente por escrito autorizada por Daemar.

Este sitio incluye conexiones a otros sitios del internet. El seguir dichas conexiones es una opción del usuario. Daemar
de ninguna manera se hace responsable por la información, materiales, productos y servicios ofrecidos en dichos sitios.