DMR Fiber-Lube Bushings

Daemar Inc. Supplying the pace of industry 1.800.387.7115

F O R O

Fiber-Lube™

	FW Series FW bearings are used in highly loaded bearing joints where a life cycle of over 500,000 cycles is desired. Testing has shown this bearing has wear under 0.006" after 1.6 million cycles.

MRP Series

MRP bearings are the bearing of choice in highly loaded bearing joints where a life cycle of over 500,000 cycles is desired. Testing has shown this bearing has wear under 0.006" after 1.6 million cycles.

HT Series

The HT bearing is a high load, low RPM bearing designed for applications where self-lubrication is desired, but conventional composite bearings will not perform at high temperatures.

	FT Series Ideal applications include those that experience linear motion. Unlike the FW bearing, the FT bearing can easily handle fabrication on the inner diameter of the bearing itself.

	IFR Series The IFR bearing (for Improved Fatigue Resistance) offers a proprietary laminate structure of the bearing backing that increases the bearing's resistance to repeated stress/strain conditions.

Technical Resources

Bearing Design Principles

Lubrication Requirements

Application Data Sheet

dmr_iso9001_2000

Copyright © 1996-2009. All rights reserved.
Daemar® Inc. / DMR™ / Fiber-Lube™ / Quick-Turn™ son marcas registradas de
Daemar® Inc. Todos los materiales de este sitio sin ninguna limitación, incluyendo
textos, logo, software, fotografías, videos, gráficas, música, y sonidos,
están protegidos por las leyes de derechos de autor.
La reproducción total o parcial, electrónica o de cualquier otra índole,
está estrictamente prohibida a menos que sea específicamente por escrito autorizada por Daemar.

Este sitio incluye conexiones a otros sitios del internet. El seguir dichas conexiones es una opción del usuario. Daemar
de ninguna manera se hace responsable por la información, materiales, productos y servicios ofrecidos en dichos sitios.