DMR Keystock

Daemar Inc. Supplying the pace of industry 1.800.387.7115

F O R O

Keystock

Square Keystock (12" & 36")

Ranges from 1/16" square to 2-1/2" square. The material is 1018 carbon steel and is available with either zinc plated or plain finish, stainless and brass.

Rectangular Keystock (12" & 36")

Ranges from 1/8" x 3/16" up to2" x 2-1/2". The material is 1018 carbon steel and is available with either zinc plated or plain finish, stainless and brass.

Metric Keystock
Made of high quality zinc plated cold drawn steel. Bars are cut, not sheared. Over tolerances: -.000mm to +.0762mm. Sold in 12 inch and 1 meter lengths.

Stepped Keystock
Is used for couplings, gears, sprockets and pulleys.

Undersize Tolerance Barstock (12") Undersize keystock is used where close or undersize tolerances are required. Ranges from 1/8" square to 2" square and also available in rectangular sizes. The material is 1018 carbon steel and is available with either zinc plated or plain finish. Also available in 303 stainless steel.

Machinery Keys Machinery keys are stocked with both ends square and manufactured from 1018 carbon steel.

Woodruff Keys Machined from 1035 steel, DMR Woodruff Keys (Half Moon Keys) are available from stock in 50 SAE size. Special sizes and materials suh as alloy steel (A-3630) are available on special order from the factory. Assortment kits of popular sizes are availablefor the convenience of mechanics and repair personnel.

Gib Head Keys Used for holding pulleys and gears tightly on the shaft. They are tapered 1/8" per foot to fit snugly on the shaft are machined from 1018 steel.

Spring Pin Kits 2 sizes of spring pin assortment kits, the DMR SP1 kit contains 10 each of 12 sizes ranging in diameters from 1/16" to 1/8" and lengths from 1/4" up to 1-1/2". The DMR SP2 kit contains 10 each of 12 sizes ranging in diameters from 5/32" to 3/8" and lengths from 1" up to 1-3/4".

Technical Resources

Materials

Copyright © 1996-2009. All rights reserved.
Daemar® Inc. / DMR™ / Fiber-Lube™ / Quick-Turn™ son marcas registradas de
Daemar® Inc. Todos los materiales de este sitio sin ninguna limitación, incluyendo
textos, logo, software, fotografías, videos, gráficas, música, y sonidos,
están protegidos por las leyes de derechos de autor.
La reproducción total o parcial, electrónica o de cualquier otra índole,
está estrictamente prohibida a menos que sea específicamente por escrito autorizada por Daemar.

Este sitio incluye conexiones a otros sitios del internet. El seguir dichas conexiones es una opción del usuario. Daemar
de ninguna manera se hace responsable por la información, materiales, productos y servicios ofrecidos en dichos sitios.