Radially Assembled Rotor Clip Retaining Rings

Daemar Inc. Supplying the pace of industry 1.800.387.7115

F O R U M


Radially Assembled Radial retaining rings are radially installed into machined grooves on shafts. They don't have lugs or lug holes and do not extend as far around the circumference of the grooves as their axial counterparts. Consequently, they can be installed quickly using Rotor Clip applicators and dispensers. Rotor Clip radial retaining rings are also available stacked (excluding the LC rings).
E - External E Ring Perhaps the most popular and widely used radial retaining ring is the "E" (so named because it is shaped like the letter "E".) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies. Size Range: .040 - 1.375 inches

RE - External Reinfroced E Ring The RE retaining ring is a reinforced version of the E ring, which will accommodate higher thrust loadings and RPM. RE rings function in the same groove as regular E rings, so that you can change from one to the other without re-engineering the application. Size Range: .094 - .562 inches

C - External Crescent Ring Ideal for low clearance applications where radial installation is preferred. Size Range: .125 - 2.000 inches

LC - External Interlocking Ring The LC ring is produced in two identical halves. The ends interlock into a groove on a shaft and, once assembled, are dynamically balanced. As a result, they are particularly effective at retaining assemblies with extremely high rotational speeds. Size Range: .469 - 3.375 inches

PO/POL - Extenal Poodle/Poodle Light Ring The PO ring features wide "ears" (resembling those of a poddle dog, thus the name) which offer extra retention surface against the retained part. PO rings also come in thinner sizes as a standard series of rings known as POL. Size Range: .156 - 2.000 inches

Radially Assembled Retaining Ring Applications

Technical Resources

Retaining Ring Interchange

Standard Materials

Standard Finishes

Packaging Options

How the Part Numbers Work

Applications

Retaining Ring FAQ

Automated Assembly

Installation

DMR Design Sheet

Retaining Ring Glossary

dmr_iso9001_2000

Copyright © 1996-2007. All rights reserved.
Daemar® Inc. / DMR™ / Fiber-Lube™ / Quick-Turn™ are trademarks of
Daemar® Inc. All material on the site, including, without limitation,
text, logo, software, photos, video, graphics, music, and sound, are
protected by copyright laws, both as individual works and as a
collection. No reproduction authorized in any form electronic or
otherwise without specific written permission.

This site includes links to other internet sites solely as a convenience
to users. Daemar, Inc. does not endorse any such linked sites or the
information, material, products and services offered.