Spirolox Medium-Heavy Duty Retaining Rings

Daemar Inc. Supplying the pace of industry 1.800.387.7115

F O R U M


Medium Heavy Duty For maximum ease of assembly with maximum thrust capacity. This series of spiral retaining rings was originally designed to fit NAS 50-51 Grooves. RRT (internal) and RST (external) thrust capacity is just below that of the Heavy Duty rings. Sizes range to fit 1/2” to 10” shaft and bore diameters (Sizes ablove 6” are 3 turn to facilitate assembly and removal).
RRT - Internal The RRT Series thrust capacity is just below that of the Heavy Duty rings. Retaining ring sizes range to fit 1/2” to 10” shaft and bore diameters (Sizes ablove 6” are 3 turn to facilitate assembly and removal). Size Range: .500 - 10.0 inches

RST - External The RST Series thrust capacity is just below that of the Heavy Duty rings. Retaining ring sizes range to fit 1/2” to 10” shaft and bore diameters (Sizes ablove 6” are 3 turn to facilitate assembly and removal). Size Range: .500 - 10.0 inches

Medium Heavy Duty Spirolox Retaining Ring Applications

Technical Resources

Spiral Ring Interchange

Materials & Finishes

Standard End Conditions

Special End Conditions

How the Part Numbers Work

Typical Applications

Installation

Dished-Type Rings & Self-Locking Rings

Ring Selection Guide

DMR Design Sheet

Retaining Ring Glossary

Copyright © 1996-2007. All rights reserved.
Daemar® Inc. / DMR™ / Fiber-Lube™ / Quick-Turn™ are trademarks of
Daemar® Inc. All material on the site, including, without limitation,
text, logo, software, photos, video, graphics, music, and sound, are
protected by copyright laws, both as individual works and as a
collection. No reproduction authorized in any form electronic or
otherwise without specific written permission.

This site includes links to other internet sites solely as a convenience
to users. Daemar, Inc. does not endorse any such linked sites or the
information, material, products and services offered.